Product Sub Group
Bolt Hole Size Ni
Breaking Point M1
Breaking Point M2
Breaking Point M3
Dropping Point, C
Flange Od D1
Flange Width Bf1
Mounted Unit Style
Nonrotating Wash. Id
Number Of Balls
Rolling Element Mat.
Rolling Element Material
Rolling Element Type
Rpm Grease (x1000)
Rpm Oil (x1000)
Working Temp Deg. C
3 8 4
- of 27
- Next »
SKU: 8 MM-C SI3N4 BALL GRADE 5 (1 PC)More Info.
SKU: #BRK-065FCZ-PB5Pieces: 4…PTFE/Graphite Seals, Peek Retainer, Zirconia ZrO2 Inner/Outer, Si3N4 Grade 5 Balls,C3 Fit, ABEC #5, Lightly Greased 20% Fill Kyodo Yushi SRL Grease, KIT (4) 4-6802 KIT (4) 4-6802More Info.
SKU: #BRK-064C-YS/C3Pieces: 4…provides extra protection against the harshest elements. All sealed bearings are packed in grease and will require short break in period to loosen up. KIT (4) 4-6902 KIT (4) 4-6902More Info.
SKU: #BRK-065C-YS/C3Pieces: 4…provides extra protection against the harshest elements. All sealed bearings are packed in grease and will require short break in period to loosen up. KIT (4) 4-6802 KIT (4) 4-6802More Info.
…my qualifier by 8 seconds. There was some stiff competition in 4wd SCT. I was happy with my results as I had improved in the Main finishing 6th moving up 3 spots and getting…
…the finish tone rang, Jacob completed 9 laps. Crystal finished second with 8 laps followed by Trevor with 8 laps. Joe Bandlow brought home fourth place with 6 laps completed. With…
…7th PLACE 4wd SCTQualified: 3rd (B Main)Finished: 3rd (B Main)Tires: Qualifiers Super Soft Rattlers, Main Super Soft SwitchesFINAL POINT SERIES STANDINGS: 8th PLACE 2wd…
…the 5 mile Dunn's Run I decided on a long warm up, so I rode in my racing chair for the 8 miles from my house to the start of the race. This was a very good race because I finished…
…the quarters (4 groups of 6); then he took 2nd in the semi’s (2 groups of 8). He had only lost to two competitors all day and was feeling great. In the finals (top 8) he was in a…
…week went to Knoxville, TN. I ran 4wd sct and 1/8 ebuggy. In sct I finished 8th out of 24 trucks and in ebuggy I finished 13th out of 3 classes of buggy’s. Next I raced at…
…well in the 4x4 short course class finishing 4th in the A main. I also qualified in the a mains for the Elec truggy class and 8th elec buggy mains. This was my first race since…