Content page for SLI

Refine Results

type

1 - 12 of 17 Search Results for With > Faq

Q: Do you ship internationally and what shipping methods are available?

…associated with these carriers when the package arrives in your country. If you are not familiar with the customs laws and fees in your country, please check with your local…

Q: What kind of maintenance do sealed bearings require?

…maintenance free and lubed for the life of the bearing. This is because they are packed with a heavy duty, lithium based grease. When the lube fully dissipates it is generally time…

Q: How long does it take to break in a bearing?

…it is not an exact science. Most bearings are packed in thick, viscous grease or with a light weight oil. As a result the bearing generally will not free spin to the touch.…

Q: Do your bearings come with a warranty?

A: Unfortunately, there is never an explicit warranty with bearings. Bearings do eventually wear out and every application, setup and operator is different. It is very difficult to…

Q: How should the Orange Seal bearings be handled before being used?

A: All Orange Seal bearings with an LD (lube dry) in the part number are supplied dry, without grease or oil. AF2 in the part number means light oil and NB2 in the part number…

Q: How much maintenance do bearings require?

…bearings that use either grease or oil should be constantly maintained and frequency level with vary depending on your application. Oil dissipates faster than grease, so typically…

Q: The bearings I received have a green shield on one side and a black shield on the other. Should either of these be removed on the back bearing? What about the front? Are these colored differently to indicate direction or does this matter?

…These bearings are lubed with grease and the seals will keep the grease in for the life of the bearing so there is no need to worry about lubrication. With regard the rear bearing…

Q: What is the best way to maintain my bearings?

…spirits or paint thinner to remove any grease or particulates. 2) Blow bearing out with compressed air. 3) Place a light drop of oil on the bearing. 4) Give the bearing a spin,…

Q: How do your different RC bearing lines compare to the stock bearings that came pre-installed. How much longer will they last?

A: Unfortunately there is never an explicit warranty with bearings. Bearings do eventually wear out and every application, setup and operator is different. It is very difficult to…

Q: I am going through a lot of clutch bell bearings, what can you recommend to get longer life?

…bearings fail prematurely. The best solution is to use a bearing with a ball that will not expand and to do away with the retainer altogether. We offer 4 different RC Car &…

Q: How do I remove my shields or seals?

…until you make a small hole. Then peel the shield back with the awl. Removable metal shields are held in place with a retaining ring. Run a sewing needle along the inside of…

Q: Are greased bearings lubed for the life of the bearing?

…have a long life and lubrication will always be reduced over time as it will dissipate with use. How fast the lubrication dissipates varies greatly depending on RPM, operating…