Refine Results
type
- Products (15213)
- Blog (10)
- Faq (31)
Q: What is the best way to maintain my bearings?
…your bearings in mineral spirits or paint thinner to remove any grease or particulates. 2) Blow bearing out with compressed air. 3) Place a light drop of oil on the bearing. 4)…
Q: What is the performance difference between the following threetype of bearings: Ceramic Metal Shield, Ceramic Yellow Seal andCeramic Ultra Seal?
A: Ceramic Metal Shield bearings are metal shielded and offer the least resistance of the three. These bearings need frequent cleaning but will give you the best performance. Not…
Q: Do ceramic bearings offer significant weight savings overtraditional steel bearings?
…Full ceramic bearings however do offer a significant weight savings by about 2/3 the weight of traditional steel bearings. Unfortunately full ceramic bearings are not appropriate…
Q: I am going through a lot of clutch bell bearings, what can you recommend to get longer life?
…retainer to a tremendous amount of stress, as a result the bearings fail prematurely. The best solution is to use a bearing with a ball that will not expand and to do away with the…
Q: How often should I clean and lube them and what lube should I use?
A: The only bearings that need to be lubed occasionally are the metal shielded bearings, and they need to be cleaned every 4 - 5 races depending on the length of each race.
Q: Should I remove the shields or seals from my engine bearings?
A: If your front bearing has two rubber seals you should not remove them. These bearings have their own grease and can help stop oil leaks. If your bearing has two shields, we…
Q: What kind of performance enhancement should I expect from ceramic bearings?
…ceramic bearings are lighter, stronger and faster. Typically you will see about 2-3 times the life out of a ceramic bearing as compared to a standard bearing. This is because…
Q: Do your bearings come with a warranty?
A: Unfortunately, there is never an explicit warranty with bearings. Bearings do eventually wear out and every application, setup and operator is different. It is very difficult to…
Q: How do I properly spin test my fishing reel bearings before installation?
…to the bearing. The flick test seems to result in a perception that a ceramic bearing does not spin as long as a steel bearing, but as soon as you put both bearings under load…
Q: Also, can the greased bearings be used out the box, or should they be treated before use?
A: Yes, the stocked greased bearings can be used as is and will give you great performance.
Q: How do your different RC bearing lines compare to the stock bearings that came pre-installed. How much longer will they last?
A: Unfortunately there is never an explicit warranty with bearings. Bearings do eventually wear out and every application, setup and operator is different. It is very difficult to…
Q: The bearings I received have a green shield on one side and a black shield on the other. Should either of these be removed on the back bearing? What about the front? Are these colored differently to indicate direction or does this matter?
…side. However, on the front bearing there is no need to remove either seal. Keeping both seals on offers better protection for the bearing. These bearings are lubed with grease and…