Refine Results
type
- Products (15198)
- Blog (10)
- Faq (31)
Q: What is the performance difference between the following threetype of bearings: Ceramic Metal Shield, Ceramic Yellow Seal andCeramic Ultra Seal?
A: Ceramic Metal Shield bearings are metal shielded and offer the least resistance of the three. These bearings need frequent cleaning but will give you the best performance. Not…
Q: How do I remove the bearings from my RC engine?
…remove it from the oven your old bearings should fall right out, if not heat the engine a little longer. We also suggest you place your bearings inside a ziploc bag and keep them…
Q: What kind of performance enhancement should I expect from ceramic bearings?
…ceramic bearings are lighter, stronger and faster. Typically you will see about 2-3 times the life out of a ceramic bearing as compared to a standard bearing. This is because…
Q: Do your bearings come with a warranty?
A: Unfortunately, there is never an explicit warranty with bearings. Bearings do eventually wear out and every application, setup and operator is different. It is very difficult to…
Q: How do I properly spin test my fishing reel bearings before installation?
…to the bearing. The flick test seems to result in a perception that a ceramic bearing does not spin as long as a steel bearing, but as soon as you put both bearings under load…
Q: If I leave my ceramic hybrids dry will they wear faster?
A: Yes, while ceramic hybrid bearings do not need any lubrication to operate the steel races will have a longer life if they have a slight amount of lube on a regular basis.
Q: Also, can the greased bearings be used out the box, or should they be treated before use?
A: Yes, the stocked greased bearings can be used as is and will give you great performance.
Q: How do your different RC bearing lines compare to the stock bearings that came pre-installed. How much longer will they last?
A: Unfortunately there is never an explicit warranty with bearings. Bearings do eventually wear out and every application, setup and operator is different. It is very difficult to…
Q: The bearings I received have a green shield on one side and a black shield on the other. Should either of these be removed on the back bearing? What about the front? Are these colored differently to indicate direction or does this matter?
…side. However, on the front bearing there is no need to remove either seal. Keeping both seals on offers better protection for the bearing. These bearings are lubed with grease and…
Q: I prefer to buy a bearing kit that is maintenance free aspossible. Which bearing kit is the least maintenance intensive?
A: Rubber sealed bearings will always offer the most protection and be the most maintenance free.
Q: When should I replace my bearings?
…cleaning steps outlined above and your bearings begin to feel gritty or notchie to the touch, they should be replaced. When bearings sit idle for a long time they must be protected…
Q: How do I calculate the amount of side or thrust load that a bearing can take?
A: Typically a radial bearing can take 5% of its Radial Load in a Thrust Load capacity.